Fixer3D is an electronic tool for finishing and repairing your 3D prints. It uses a micro step motor and a programmable syringe pump to release the desired amount of resin, either by individual drops or a continuous stream. The three buttons on the body control the movement of the replaceable syringe and activation of the integrated long life UV LED, which has a tightly focused beam to ensure rapid curing of the resin within 1-30 seconds. In addition, the firmware is open source and customizable to your preferences and needs. Made by 3DFacture. Ships by 2 weeks.
Charging Voltage: 5V
Charging Current: <500 mA
Battery Capacity: 400 mAh
Resin Extrusion Speed: Programmable
Minmal Drop Size: ~30 μl
UV LED Power: ~ 100 mw
Physical Dimensions: 150mm X 30mm
Product Weight: 160g
Our limited warranty applies to 3DFacture's Fixer3D print finishing tools. Our warranty covers all shipping damage or material defects of the Product for one (1) year from the date of purchase or after the date of the first delivery of the product. ("Warranty Period")
For hardware failure, Spatial Dynamics may elect to replace defective unit(s) at its sole discretion. Replacement unit(s) will be supplied on an exchange basis and the return of the defective unit(s) must be approved through the Return Merchandise Authorization ("RMA") process before it is deemed qualified for the service.
Spatial Dynamics shall bear the cost of replacement but not the shipping costs associated with the issuance of replacement unit(s). Shipping charges associated with the return of the replacement unit(s) are the sole responsibility of the customer. The replacement unit(s) do not carry a warranty in themselves, but will be replaced as long as the Product itself is within the warranty period, subject to the terms and conditions of this limited warranty.